Lv1
62 积分 2025-10-09 加入
Powder-bed Fusion additive manufacturing of 316L stainless steel using short-wavelength diode point melting
7天前
已关闭
Characterisation of the growth of the oxide layer on wrought and LPBF 316L stainless steels by electrochemical impedance spectroscopy measurements
7天前
已关闭
Effect of Lead-Bismuth Eutectic Oxygen Concentration on the Onset of Dissolution Corrosion in 316 L Austenitic Stainless Steel at 450 °C
8天前
已完结
Effect of deformation twinning on dissolution corrosion of 316L stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500 °C
8天前
已完结
High-temperature corrosion behavior of 316 H stainless steel in lead-bismuth eutectic containing cesium
8天前
已完结
First-principles study on the corrosion characteristics of surface defects for fusion reactor blanket structural steel in liquid lead-lithium environment
15天前
已关闭
Corrosion behavior of additively manufactured PH steels in simulated nuclear reactor environments
25天前
已完结
Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel
28天前
已完结
Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel
29天前
已关闭
Insights into the preferential intergranular oxidation mechanism of 316L austenitic stainless steel exposed to oxygen saturated lead-bismuth eutectic (LBE)
1个月前
已完结
皖公网安备34019202002308
