生物陶瓷
材料科学
陶瓷
3D打印
骨组织
生物医学工程
复合材料
医学
作者
Naren Raja,Honghyun Park,Chang Woo Gal,Aram Sung,Yeong‐Jin Choi,Hui‐suk Yun
出处
期刊:Biofabrication
[IOP Publishing]
日期:2023-03-30
卷期号:15 (3): 035006-035006
被引量:8
标识
DOI:10.1088/1758-5090/acc903
摘要
Volumetric bone tissue defects are beyond the intrinsic regenerative capacity of bone tissue. With the recent development of ceramic 3D printing, various bioceramic scaffolds that can induce bone regeneration are being actively developed. However, hierarchical bone is complex, with overhanging structures that require additional sacrificial support during ceramic 3D printing. Not only can this increase the overall process time and material consumption, but breaks and cracks may occur when sacrificial supports are removed from fabricated ceramic structures. In this study, a support-less ceramic printing (SLCP) process using a hydrogel bath was developed to facilitate the manufacture of complex bone substitutes. A hydrogel bath, consisting of pluronic P123 with temperature-sensitive properties, mechanically supported the fabricated structure when the bioceramic ink was extruded into the bath and promoted the cement reaction to cure the bioceramic. SLCP enables the fabrication of complex bone constructs with overhanging structures, such as the mandible and maxillofacial bones, with reduced overall processing time and material consumption. Scaffolds fabricated by SLCP showed more cell adhesion, higher cell growth rate, and osteogenic protein expression due to their rougher surface than conventionally printed scaffolds. Hybrid scaffolds were fabricated by SLCP to co-print cells and bioceramics, and SLCP provided a cell-friendly environment, exhibiting high cell viability. SLCP enables control of the shape of various cells, bioactive substances, and bioceramics and thus can be used as an innovative 3D bioprinting technique to manufacture complex hierarchical bone structures.
科研通智能强力驱动
Strongly Powered by AbleSci AI