Numerical modeling for transportation of ferrofluid due to electrical force through a porous container

In this work, three passive techniques (ferrofluid, porous zone, curved surfaces) have been merged with one active technique (electric force) to enhance the convective rate. The permeable enclosure contains two curved walls and two straight walls which are not stationary. The concentration of ferrofluid within the domain is constant and associated formulations for properties of ferrofluid have been applied in modeling in which no slip velocity exists among particles. With define, measure, analyze, improve and control (DMAIC), the vorticity equation for partial equations which contain the source terms of electrohydrodynamic (EHD) and permeability, final equations have been achieved and for finding the solution combination of two basic techniques were utilized. Low deviation with a prior article in the validation procedure indicated a good agreement. Nu can augment around 0.49% if platelet particles were applied rather than sphere. Utilizing radiation in simulation makes Nu augment around 82.27%. Elevating Da in the absence and appearance of EHD leads to an augment of Nu around 145.01% and 393.38%. Appearance of EHD enhances the Nu about 96.04%.