材料科学
泥浆
镍
多孔性
钛
铸造
合金
绿色车身
钛镍合金
冶金
粘度
复合材料
形状记忆合金
烧结
作者
Bohua Duan,Hai‐Xia Hong,Dezhi Wang,Hui-Jiang Liu,Xiaojia Dong,Dandan Liang
出处
期刊:Rare Metals
[Springer Science+Business Media]
日期:2013-12-30
卷期号:33 (4): 394-399
被引量:8
标识
DOI:10.1007/s12598-013-0195-x
摘要
Abstract To explore the preparation of porous nickel–titanium alloy with excellent properties, larger size and complex shape, the premixed powder of Ni and Ti with atomic ratio of 1:1 was shaped by gel‐casting. The effects of solids loading and the content of dispersant on flow ability of nickel–titanium slurry and the mechanical properties of nickel–titanium sintered body were studied. The drying models under different solids loading were also discussed. The results show that the viscosity of slurries significantly increases with an increase in solids loading. After a proper process of drying, the green body with complex shape is obtained. The sintered body with porosity rate reaching up to 49.5 % and compression strength reaching to 364.74 MPa could meet the basic demands of implant materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI