材料科学
极限抗拉强度
合金
铝
图层(电子)
复合材料
冶金
拉伸试验
压力(语言学)
相(物质)
断裂(地质)
语言学
哲学
有机化学
化学
作者
Tianxing Chang,Xuewei Fang,Gang Liu,Hongkai Zhang,Ke Huang
标识
DOI:10.1016/j.jmst.2022.02.024
摘要
• Fracture occurred at a layer thickness above the interface layer during tensile test, regardless of the deposition order of the dissimilar alloys. • Thermal stress due to long dwell time and the remelting of S-Al 2 CuMg phase are the main factors promoting crack initiation. • Cracks mainly propagate along the aggregated pores and strip θ-Al 2 Cu phase distributed along the grain boundary. • The component deposited with bottom half of 2319 and top half of 5B06 exhibits better mechanical properties, which are approaching to that of 2319 base metal. Aluminum alloy is the most widely used light alloy at present. By combining different types of aluminum alloys, their functional properties can be expanded. In the present research, two components composed of 2319 (Al-6.5Cu) and 5B06 (Al-6.4Mg) dissimilar alloys were fabricated by wire and arc additive manufacturing (WAAM). The deposited component with the bottom half of 2319 and the top half of 5B06 exhibits better mechanical properties than its counterpart deposited vice versa. Its ultimate tensile strength, yield strength, and elongation are 258.5 MPa, 139.3 MPa, and 5.6%, respectively, which are only slightly inferior to the mechanical properties of 2319 base metal. The results show that for both components, fracture occurred at a layer thickness above the interface layer during the tensile test, regardless of the deposition order. It appears that the thermal stress due to the long dwell time and the remelting of the S-Al 2 CuMg phase are the main factors promoting crack initiation. Depending on the deposition order, cracks propagate either along the aggregated pores or strip θ-Al 2 Cu phase distributed along the grain boundary. By analyzing the heat input and selecting the appropriate depositing order, the strength of WAAM dissimilar aluminum alloys can be effectively improved through the proper control of microstructure and internal defects.
科研通智能强力驱动
Strongly Powered by AbleSci AI