土工格栅
土工合成材料
材料科学
横截面
铸造厂
极限抗拉强度
岩土工程
复合材料
剪切(地质)
抗剪强度(土壤)
结构工程
钢筋
工程类
地质学
冶金
土壤水分
土壤科学
作者
Bhargav Kumar Karnamprabhakara,Umashankar Balunaini,Arul Arulrajah,Robert Evans
出处
期刊:Geosynthetics International
[Thomas Telford Ltd.]
日期:2023-04-01
卷期号:30 (2): 169-183
被引量:5
标识
DOI:10.1680/jgein.21.00005a
摘要
The reuse of waste materials can help alleviate problems related to placing them in landfill and can also preserve fast dwindling natural granular materials. Waste foundry sand (WFS) can be a promising candidate as a backfill material in the construction of mechanically stabilised earth (MSE) walls. In the design of such MSE structures, the interaction properties between WFS and geogrid reinforcement are important input parameters. In the present study, the interaction properties of a wide range of different polyester (PET) uniaxial geogrids with WFS in two common modes – direct shear and pullout – were evaluated using large-size interface direct shear and pullout tests. In the pullout mode, the interaction of the geogrid embedded in WFS under axial and transverse pullout was studied. The direct shear interface coefficients of four PET geogrids with WFS were found to be in the range observed in conventional fill materials. Higher axial and transverse pullout resistance factors were observed for geogrids with higher tensile strength and higher opening area ratio. Empirical equations were proposed to estimate the axial and transverse pullout resistances of geogrids at two pullout displacements. Finally, sensitivity analyses were carried out to identify the parameters significantly influencing the axial and transverse pullout resistances of geogrids in WFS.
科研通智能强力驱动
Strongly Powered by AbleSci AI