材料科学
涂层
多孔性
等离子体电解氧化
钛
扫描电子显微镜
陶瓷
电解质
复合材料
化学工程
冶金
电极
化学
物理化学
工程类
作者
Xun Zhang,S. Aliasghari,A. Němcová,Timothy L. Burnett,Ivo Kuběna,Miroslav Šmíd,George Edward Thompson,Peter Skeldon,Philip John Withers
标识
DOI:10.1021/acsami.6b00274
摘要
Plasma electrolytic oxidation (PEO) is of increasing interest for the formation of ceramic coatings on metals for applications that require diverse coating properties, such as wear and corrosion resistance, low thermal conductivity, and biocompatibility. Porosity in the coatings can have an important impact on the coating performance. However, the quantification of the porosity in coatings can be difficult due to the wide range of pore sizes and the complexity of the coating morphology. In this work, a PEO coating formed on titanium is examined using high resolution X-ray computed tomography (X-ray CT). The observations are validated by comparisons of surface views and cross-sectional views of specific coating features obtained using X-ray CT and scanning electron microscopy. The X-ray CT technique is shown to be capable of resolving pores with volumes of at least 6 μm(3). Furthermore, the shapes of large pores are revealed and a correlation is demonstrated between the locations of the pores, nodules on the coating surface, and depressions in the titanium substrate. The locations and morphologies of the pores, which constitute 5.7% of the coating volume, indicate that they are generated by release of oxygen gas from the molten coating.
科研通智能强力驱动
Strongly Powered by AbleSci AI