管道运输
材料科学
腐蚀
涡流
涡流检测
管道(软件)
电流(流体)
冶金
点蚀
清管
声学
核工程
复合材料
涡流传感器
光电子学
无损检测
作者
Zihao Zhang,Jian Tang,Zhe Wang,Jianfeng Hao,Junhai Cheng,Xiaokang Wan,Jingwei Cheng,Wei Li,Shuhao Ma
标识
DOI:10.1080/10589759.2026.2649563
摘要
Pulsed eddy current (PEC) testing is effective for detecting uniform wall thinning in cladded pipelines; however, reliable localised corrosion remains challenging. Under large lift-off, the excitation field reaching pipeline substrate is strongly attenuated, and the high relative permeability of ferromagnetic pipelines further limits penetration, resulting in weak defect signals with low sensitivity and signal-to-noise ratio (SNR). To overcome these limitations, this work proposes a dual enhancement strategy that combines array focusing with DC bias magnetisation. Based on this concept, a focused array magnetised PEC (FAM-PEC) sensor is developed, integrating multiple synchronised excitation coils with differential receiving coils and an external magnetising module. A finite-element model is established to elucidate the mechanisms and guide optimisation of the focusing geometry and magnetisation design. Experiments compare four configurations: a traditional single-excitation sensor, an array-only sensor, a magnetisation-only sensor, and the proposed integrated sensor. Results show that the proposed sensor the strongest defect responses and the highest SNR. For a cladded pipeline with a 100 mm lift-off, the sensor successfully detects Φ10.0 mm × 6.4 mm flat-bottom hole defects on both the outer and inner walls. Compared with the traditional sensor, the outer-wall detection SNR is improved by 13.9 dB, and reliable detection of inner-wall defects is achieved with an SNR of 15.9 dB. These findings provide a practical and experimentally validated sensing solution for high-sensitivity localised corrosion inspection in thickly cladded ferromagnetic pipelines.
科研通智能强力驱动
Strongly Powered by AbleSci AI