Considering agitation in ultrasonic electroplating through observation of cavitation

Ultrasonic electroplating produces various effects, including refinement of the plating film structure, by generating localized agitation through cavitation bubbles. However, details of the agitation mechanism have not been clarified because ultrasonic cavitation is very small in scale and occurs rapidly, and its reproducibility is low. Therefore, using laser-induced cavitation, which can generate cavitation similar to ultrasonic waves with high reproducibility, the author attempted to elucidate the conditions and frequency of cavitation generation that affect the agitation phenomenon in ultrasonic electroplating. By controlling the laser irradiation position, three different cavitation conditions were established, and the microstructures of the plated films produced were compared. Microstructural refinement was the most advanced under the condition of microjet generation. The frequency of cavitation generation at any position in the ultrasonic electroplating was estimated to be < 1 Hz.