Emulsion stability of hydroxybutyl chitosan as emulsifier at low pH: Effects of the degree of substitutions of hydroxybutyl groups

Keeping the stability of emulsions at low pH is necessary for their successful applications in food and delivery systems. To achieve this goal, hydroxybutyl chitosan (HBC) with three degrees of substitution (DSs) was used as an emulsifier to investigate the effect of HBC structure on the emulsion stability. The DSs of HBC-5, HBC-10, and HBC-20 were 0.66, 1.51, and 2.19, respectively. The stability of oil-in-water emulsions against creaming/coalescence was positively correlated with the DS. As pH decreased to 2, HBC-20-stabilized emulsions were most stable without creaming or coalescence. After 30 days of storage, no changes in the droplet sizes of HBC-20-stabilized emulsions were observed, whereas the droplet sizes of HBC-5/10- stabilized emulsions significantly increased at low pH. The stability of HBC-20- stabilized emulsions at low pH was attributed to the higher surface activity and electrostatic repulsion. Our research revealed that the emulsion stability of HBC under low pH conditions can be controlled by the density of the hydroxybutyl groups in HBC. In vitro digestion further revealed the excellent stability of HBC-20-stabilized emulsions in simulated gastric fluid, which highlighted the enormous potential of HBC-20 to protect liposoluble drugs and nutrients from the extreme pH environment.