磁导率
表面粗糙度
降水
表面光洁度
地质学
矿物学
接头(建筑物)
材料科学
化学
复合材料
物理
气象学
工程类
膜
生物化学
建筑工程
作者
Wei Li,Xin Lin,Shuang Li,Weimin Xiao
标识
DOI:10.1080/01490451.2025.2553538
摘要
Microbially induced calcium carbonate precipitation (MICP) is a promising grouting technology for enhancing strength and reducing permeability in sandy soils, however, its application in rock joints has been less explored. This study presents MICP laboratory experiments on rock joints featuring Barton’s standard profile characteristics to investigate the evolution of CaCO3 precipitation and examine the influence of joint aperture and surface roughness. Experimental results revealed that larger joint apertures increase the random transportation of CaCO3 during MICP treatment, leading to dense precipitate accumulation but also raising the likelihood of void formation within the joint. Additionally, increased surface roughness accelerates CaCO3 precipitation at the inlet, outlet, and asperity peaks, with less precipitates in the troughs behind the joint peaks once the rock joints are sealed. In terms of permeability, the rock joints transmissivity decreased by 3.3%–87.3% after MICP treatment, with a significantly greater reduction observed in smooth joints compared to rough joints, and this reduction intensified as joint aperture increased. Moreover, hyperbolic models effectively capture the diffusion kinetics of CaCO3, describing the influence of aperture and surface roughness on CaCO3 diffusion. Finally, the reason underlying voids formation on rock joint surfaces was analyzed, and a mitigation strategy was also considered.
科研通智能强力驱动
Strongly Powered by AbleSci AI