腐蚀
铸铁
材料科学
冶金
微观结构
原电池
图层(电子)
电偶腐蚀
石墨
氧化物
铁质
硅
复合材料
作者
Nathalie Ochoa,Enara Mardaras,Rodolfo González-Martínez,Garikoitz Artola
标识
DOI:10.1016/j.corsci.2022.110480
摘要
The effect of the microstructure on the corrosion resistance of four grades of cast irons was studied in an alkaline 0.03 M NaCl solution. The research was performed by combining microstructural analysis, electrochemical measurements and the characterization of the corroded surfaces. The structure underneath the corrosion layer determines the corrosion resistance of cast irons. It increases according to the following order: grey < chunky < spheroidal < high silicon ductile cast iron. The graphite morphology governs the rate of galvanic corrosion whereas the ferrous matrix controls the formation of non-disrupted oxide layers. A pseudo-passive layer explained the lowest corrosion rate of the high silicon ductile cast iron.
科研通智能强力驱动
Strongly Powered by AbleSci AI