润滑油
方位(导航)
声学
超声波传感器
传感器
材料科学
脉搏(音乐)
转子(电动)
振动
信号(编程语言)
转速
复合材料
机械工程
工程类
电气工程
物理
计算机科学
电压
程序设计语言
天文
作者
Meng Li,Heng Liu,Cong Yu Xu,Minqing Jing,Guihua Dong
标识
DOI:10.1080/10402004.2016.1146974
摘要
This article describes the measurement of lubricant film thickness distribution in a roller bearing by using two juxtaposed transducers, which are excited by a new ultrasonic pulse receiver with a maximum pulse repetition rate (PRR) of 100 kHz. The experimental results demonstrate the feasibility and advantage of this method with high PRRs. The influence of rotating speed and radial load on the measured film thickness are shown to be consistent with the theoretical predictions. Skewing of the roller in the bearing is observed. A combined trigger signal is proposed to reduce the influence of the cyclical vibration of the rotor.
科研通智能强力驱动
Strongly Powered by AbleSci AI