光滑粒子流体力学
机械
粒状材料
流量(数学)
物理
粒子(生态学)
材料科学
经典力学
颗粒物质
粒子法
计算流体力学
颗粒流
数学模型
作者
Yinghui Wu,Liangrui Ding,佟振博,David Liu,Qijun Zheng
标识
DOI:10.1016/j.powtec.2026.123387
摘要
Rotary kilns are widely used to mix, dry, and heat-treat particulate materials, yet their thermal response is strongly coupled to granular motion, wall–bed contact, and internal temperature redistribution. Here, a quasi-three-dimensional (quasi-3D) smoothed particle hydrodynamics (SPH) model with a μ ( I )-elastoplastic constitutive description is developed and validated against published measurements of bed velocity and mean temperature. The effects of three half-perimeter wall-mounted lifter geometries (rectangular, semicircular, and custom), lifter number, and embedded “+”-shaped lifters with different arm lengths and numbers are examined. Under the investigated condition of 5 rpm and 25% filling, the 15 s transient response (approximately 1.25 revolutions) shows that wall-mounted lifters generally increase granular mobility and accelerate bed heating, with only moderate differences among lifter geometries. Embedded lifters can produce higher bed-averaged temperatures even when increasing lifter number reduces global bed velocity because of local obstruction. Because the lifter surfaces are maintained at the prescribed wall temperature, the observed heating enhancement reflects the combined effects of particle redistribution, wall/lifter–bed contact, and additional heated surface area, whose individual contributions cannot be separated in the present simulations. The temperature standard deviation does not vary monotonically with lifter configuration, indicating that enhanced heat uptake does not necessarily improve instantaneous thermal uniformity. Péclet-number results are used only to compare the relative contribution of particle motion and are not interpreted as evidence of distinct thermal-transport regimes. These results provide a comparative assessment of lifter effects on granular dynamics, transient heating, and thermal uniformity in a wall-heated rotary-kiln cross section.
科研通智能强力驱动
Strongly Powered by AbleSci AI