材料科学
高温合金
残余应力
表面完整性
表面粗糙度
软化
冶金
机械加工
极限抗拉强度
复合材料
压缩(物理)
压力(语言学)
变形(气象学)
应变率
表面光洁度
抗压强度
张力(地质)
碳化物
刀具磨损
摩擦系数
复合数
转速
热的
摩擦学
刀具
作者
Zhunying Sun,Tao Zhang,Donghui Li,Genglei Zhu
标识
DOI:10.1088/2631-8695/ae7ece
摘要
Abstract This study examines the effects of cutting speed and feed rate on the surface integrity and tribological performance of nickel-based superalloy GH4169 during high-speed orthogonal cutting. Combining in-process monitoring of cutting forces and temperature with post-process analyses—x-ray diffraction, white-light interferometry, and ball-on-ring wear tests—the research reveals that cutting forces decline with speed due to thermal softening but increase with feed rate as the deformation zone widens. Cutting temperature rises with both parameters. A characteristic ‘spoon-shaped’ residual stress profile is identified, with surface tension transitioning to compression within 0.05–0.1 mm and penetrating to about 0.3 mm depth. Maximum surface tensile stress occurs at 94.2 m min −1 , whereas compressive stress grows with feed rate. Both surface roughness and friction coefficient reach optimal values at 94.2 m min −1 but deteriorate with further speed increase or higher feed rates. The results indicate that a cutting speed of 94.2 m min −1 combined with a low feed rate yields improved surface finish, favorable compressive residual stress, and enhanced wear resistance, offering practical guidance for optimizing GH4169 machining to extend component service life.
科研通智能强力驱动
Strongly Powered by AbleSci AI