材料科学
硅橡胶
成核
固化(化学)
复合材料
超临界二氧化碳
天然橡胶
发泡剂
硅酮
超临界流体
化学工程
化学
有机化学
工程类
聚氨酯
作者
Hao Xu,Yunchuan He,Xia Liao,Tinggang Luo,Guangxian Li,Qi Yun Yang,Chuanjian Zhou
标识
DOI:10.1177/026248931603500102
摘要
Silicone rubber foams were successfully generated by environmentally friendly blowing agent, supercritical carbon dioxide (scCO 2 ), in this research. Firstly, the effect of the saturation time on the cellular structure was investigated. The diffusion of scCO 2 into the rubber matrix would be enhanced thus decreasing the viscosity as increasing the saturation time. It would further promote the cell growth, which has a close connection with the cellular structure. After that, the effect of pre-curing time on cellular morphology of silicone rubber foams was further researched in detail. When increasing pre-curing time in the short time range, cell nucleation would be affected more than cell growth in the foaming process. If continuously increasing pre-curing time, both cell nucleation and growth would be restricted thus resulting in the formation of silicone rubber foams with small cell density and small cell size. This investigation not only provided a green way to produce silicone rubber foams, but also guided us to control cellular morphology via the saturation time and pre-curing time.
科研通智能强力驱动
Strongly Powered by AbleSci AI