Continuous Cooling Phase Transformation Rule of 20CrMnTi Low-Carbon Alloy Steel

贝氏体 材料科学 珠光体 铁氧体(磁铁) 淬透性 连续冷却转变 马氏体 冶金 奥氏体 膨胀计 合金钢 合金 微观结构 复合材料 热膨胀
作者
Li Zhang Li,Wei He,Lin Lin Liao,Yin Li Chen,Hai Feng Yan,Guang Hua Liu,Zhi Wei Sun
出处
期刊:Materials Science Forum [Trans Tech Publications]
卷期号:944: 303-312 被引量:7
标识
DOI:10.4028/www.scientific.net/msf.944.303
摘要

Gear steel is a ferritic steel. In the rolling process, the ideal structure is ferrite + pearlite, and bainite or martensite is not expected. However, due to the high alloy content, the hardenability is good, and the bainite or martensite structure is very likely to be generated upon cooling after rolling. In this paper, phase transformation rules during continuous cooling of 20CrMnTi with and without deformation were studied to guide the avoidance of the appearance of bainite or martensite in steel. A combined method of dilatometry and metallography was adopted in the experiments, and the dilatometer DIL805A and thermo-simulation Gleeble3500 were used. Both dynamic and static continuous cooling transformation (CCT) diagrams were drawn by using the software Origin. The causes of those changes in starting temperature, finishing temperature, starting time and transformation duration in ferrite-pearlite phase transformation were analyzed, and the change in Vickers hardness of samples with different cooling rate was discussed. The results indicate that with different cooling rate, there are three phase transformation zones: ferrite-pearlite, bainite and martensite. Deformation of austenite accelerates the occurrence of transformation obviously and moves CCT curve to left and up direction. When the cooling rate is lower than 1 °C/s, the phases in samples are mainly ferrite and pearlite, which is the ideal microstructure of experimental steel. As the cooling rate increases, starting temperature of ferrite transformation in steel decreases, starting time reduces, transformation duration gradually decreases, and the Vickers hardness of samples increases. Under the cooling rate of 0.5 °C/s, ferrite transformation in deformed sample starts at 751.67 °C, ferrite-pearlite phase transformation lasts 167.9 s, and Vickers hardness of sample is 183.4 HV.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
认真无极完成签到,获得积分10
1秒前
领导范儿的应助被leotao采纳,获得10
2秒前
mdie完成签到,获得积分10
2秒前
chenamy完成签到,获得积分10
2秒前
研田青衿完成签到,获得积分10
2秒前
聪明的豌豆荚完成签到 ,获得积分10
2秒前
1111发布了新的文献求助10
3秒前
charry完成签到,获得积分10
3秒前
小包包了包完成签到,获得积分10
3秒前
3秒前
3秒前
4秒前
DJ完成签到 ,获得积分10
4秒前
慕青的应助被瓜瓜采纳,获得10
4秒前
hu完成签到 ,获得积分10
5秒前
结实的胡萝卜完成签到,获得积分10
5秒前
生化环材的生化环材完成签到,获得积分10
5秒前
乔凌云完成签到 ,获得积分10
5秒前
怡然的凌兰完成签到,获得积分10
5秒前
5秒前
平淡的惜芹完成签到,获得积分10
6秒前
CodeCraft的应助被星空采纳,获得10
6秒前
深情安青的应助被海洋蝌蚪采纳,获得10
6秒前
热情小凡完成签到,获得积分10
6秒前
jklwss完成签到,获得积分10
6秒前
swent_66完成签到,获得积分10
6秒前
6秒前
jg完成签到,获得积分10
6秒前
6秒前
zhabgyyy完成签到,获得积分10
7秒前
7秒前
7秒前
12发布了新的文献求助10
7秒前
hjabao完成签到,获得积分10
7秒前
丘比特的应助被慕念采纳,获得10
7秒前
8秒前
八倍速生活完成签到,获得积分10
8秒前
QDU的应助被吾吾采纳,获得10
8秒前
9秒前
9秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
Social Psychology in the Real World 600
八旗制度の研究 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8180488
求助须知:如何正确求助?哪些是违规求助? 9570437
关于积分的说明 21812406
捐赠科研通 7776516
什么是DOI,文献DOI怎么找? 3433277
关于科研通互助平台的介绍 2557516
邀请新用户注册赠送积分活动 2479162