Experimental and numerical investigation on coal drawing from thick steep seam with longwall top coal caving mining

Steep coal seam mining activities will frequently occur during the next few decades in China. In this study, both experimental and numerical methods are employed to investigate the coal drawing from thick steep seam with longwall top coal caving mining. A series of analyses is performed to investigate the features of the drawing body, the distribution of top coal recovery ratio and the shape of the rock flow under steep conditions. The results indicate that the drawing body of top coal develops prior to upper side of the panel face obviously, and the top coal in the central part of the panel has a higher recovery ratio than that in the lower and upper parts in steep coal seam with caving mining method. The flow paths of the fragmented top coal are nearly straight lines moving towards the drawing window, and the fastest path maintains a constant angle with the plumb line. The spatial shape of the rock flow indicates “bidirectional asymmetry,” which results from the presence of the shield beam and dip angle of the coal seam; thus, this is the root cause of the appearance of the drawing body’s prior development towards the upper side of the panel. The field observation data indicates the same distribution of top coal recovery as that in the physical experiment and numerical simulation. Furthermore, suggested measurements are proposed to improve top coal recovery in steep seam mining based on the engineering practice of Dayuan coal mine.