脚手架
材料科学
微型多孔材料
导电体
组织工程
透明质酸
多孔性
生物医学工程
化学工程
水溶液
相(物质)
粘附
聚合物
复合材料
电导率
导电聚合物
细胞粘附
粘度
纳米技术
动态力学分析
佩多:嘘
双水相体系
电阻率和电导率
化学
作者
Quentin Bailleul,Varvara Gribova,Christine Affolter-Zbaraszczuk,Sarah Benmalek-Kehili,Louis Foltzer,Solene Léger,Éric Mathieu,Florent Meyer,Mehdi Vahdati,Fouzia Boulmedais
标识
DOI:10.1021/acsapm.5c04591
摘要
Conductive polymers are increasingly studied in tissue engineering. Even without electrical stimulation, they significantly improve cell adhesion and growth. In this study, we report the preparation of conductive hyaluronic acid/chitosan (HA/CHI) scaffolds using salinity change-induced aqueous phase separation, followed by a cross-linking (CRL) step and poly(3,4)ethylene-dioxythiophene (PEDOT) functionalization. HA/CHI were mixed in a concentrated NaCl solution to prevent their complexation. A polysaccharide-based scaffold was formed by immersing a millimeter-thick volume of the HA/CHI mixture solution in pure water. The scaffold was then further cross-linked and functionalized with PEDOT to produce mechanically strong and electrically conductive HA/CHI scaffolds that support enhanced cell colonization. The resulting microporous PEDOT-(HA/CHI) CRL scaffold has a porosity of 73% and an average pore size of 44 ± 15 μm. It exhibits a storage modulus of 15 kPa and a conductivity of 1.5 ± 0.3 × 10 –5 S/cm. Unlike the HA/CHI and (HA/CHI) CRL scaffolds, NIH3T3 fibroblasts adhere to, grow on, and colonize the conductive scaffold within 14 days. Compared to traditional methods, the salinity change-induced aqueous phase separation technique does not require complex equipment and consumes less energy. This method shows great potential for creating sustainable scaffolds for tissue engineering.
科研通智能强力驱动
Strongly Powered by AbleSci AI