Modeling of Compliant Mechanisms in MATLAB Simscape

Abstract This paper presents the informative process of modeling of compliant mechanisms using MATLAB Simscape. Simscape is the modeling environment analyzing both rigid and flexible systems using either the blocks provided in the library or the CAD models imported from modeling software. We present the modeling of four compliant mechanisms: dwell, five bar, translational and hopping mechanisms. Once the cad model of a system is imported into Simscape, the flexible links or flexure segment on each example system is replaced by its equivalent lumped parameter block. Compliant dwell mechanism is comprised of a rail, two pinned-pinned flexible links, slider, rigid crank and a DC motor. The second mechanism is a fully compliant five bar mechanism incorporating large deflecting flexures and actuated by two servo motors. The objective is to control the trajectory of the tip position. Third example models a bio-inspired translational compliant mechanism driven by servo motors and comprised of three sliders connected by single piece designed 2 rigid arm-flexure hinge linkages mimicking the motion of a caterpillar. The last example is the modeling of a compliant hopping robot consisting of two pairs of gears; one pair is attached to the motor and the other pair allows the bottom links to rotate at same angular velocity in opposite directions.