吸附剂
Mercury(编程语言)
吸附
烟气
热脱附
解吸
X射线光电子能谱
催化作用
化学
化学工程
核化学
材料科学
有机化学
程序设计语言
计算机科学
工程类
作者
Xiang Wu,Yufeng Duan,Na Li,Peng Hu,Ting Yao,Jialin Meng,Shaojun Ren,Hongqi Wei
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2019-08-08
卷期号:33 (9): 8835-8842
被引量:26
标识
DOI:10.1021/acs.energyfuels.9b00978
摘要
Mn/TiO 2 (MT), Ce/TiO 2 (CT), and Ce–Mn/TiO 2 (CMT) for mercury removal were prepared by an impregnation method, and mercury adsorption tests were conducted in a fixed-bed reactor. Regeneration experiments were carried out in a thermal regeneration reactor, and the effects of temperature and atmosphere on the regenerability were investigated. Surface physicochemical characteristics of fresh, spent, and regenerated CMT were analyzed by means of N 2 adsorption–desorption methods, scanning electron microscopy, and X-ray photoelectron spectroscopy. The results showed that CMT had a higher resistance to SO 2 poisoning than MT and CT and maintained a high mercury removal capability within a wide range of SO 2 concentrations. Optimal thermal regenerability of spent CMT was obtained after thermal desorption at 400 °C followed by N 2 + 50% O 2 for 2 h. Ten cycles of mercury adsorption–regeneration demonstrated that there was no significant change in mercury removal capacity relative to fresh catalytic sorbent after multiple regeneration cycles. The regeneration of CMT was mainly attributed to the decomposition of mercury compounds and the restoration of Mn 4+, Ce 4+, and the chemisorbed oxygen on the catalytic sorbent surface. The procedure for the centralized control of mercury emissions from the flue gas by CMT was also analyzed for industrial application.
科研通智能强力驱动
Strongly Powered by AbleSci AI