超亲水性
生物污染
膜
结垢
接触角
化学工程
材料科学
多孔性
膜结构
膜污染
润湿
造型(装饰)
复合材料
化学
生物化学
工程类
作者
Linna Shan,Zhensheng Yang,Wenwen Li,Hao Li,Ning Liu,Zhiying Wang
标识
DOI:10.1016/j.reactfunctpolym.2022.105291
摘要
Membrane fouling is widely acknowledged as the major hindrance to the efficient separation of oil-water emulsions. Superhydrophilic EVAL/F127 porous membranes with micron-submicron hierarchical structure were prepared via micro-molding assisted immersion precipitation (PSμm process). The micron-scale concave-convex structure was constructed by the micro-molding process with 1000 mesh sandpaper, and then the sub-micron structure of the surface was modulated by F127. With the combination of optimized hierarchical structure and F127 hydrophilic modifier, EVAL/F127 porous membrane is superhydrophilic (water contact angle less than 10°) and strongly anti-fouling. ATR-FTIR, SEM, AFM, water contact angle (WCA), pure water flux, porosity and equilibrium water content were used to characterize the textural and properties of EVAL porous membranes. The separation performance and antifouling properties of the membranes were evaluated using oil-in-water emulsions as fouling agents. When the F127 content was 10%, the EVAL/F127 blended porous membrane not only performed well in retention performance (95.3% retention), but also had high flux recovery (91.6%) after hydrodynamic cleaning. Thus, the combined strategy based on hierarchical structure and hydrophilic modification provides a facile solution for the preparation of antifouling membranes.
科研通智能强力驱动
Strongly Powered by AbleSci AI