Sensitive sensing of Hg(II) based on lattice B and surface F co-doped CeO2: Synergies of catalysis and adsorption brought by doping site engineering

Transition metal oxides are widely used in the detection of heavy metal ions (HMIs), and the co-doping strategy that introducing a variety of different dopant atoms to modify them can obtain a better detection performance. However, there is very little research on the co-doped transition metal oxides by non-metallic elements for electrochemical detection. Herein, boron (B) and fluorine (F) co-doped CeO2 nanomaterial (BFC) is constructed to serve as the electrochemically sensitive interface for the detection of Hg(II). B and F affect the sensitivity of CeO2 to HMIs when they were introduced at different doping sites. Through a variety of characterization, it is proved that B is successfully doped into the lattice and F is doped on the surface of the material. Through the improvement of the catalytic properties and adsorption capacity of CeO2 by different doping sites, this B and F co-doped CeO2 exhibits excellent square wave anodic stripping voltammetry (SWASV) current responses to Hg(II). Both the high sensitivity of 906.99 μA μM-1 cm-2 and the low limit of detection (LOD) of 0.006 μM are satisfactory. Besides, this BFC glassy carbon electrode (GCE) also has good anti-interference property, which has been successfully used in the detection of Hg(II) in actual water. This discovery provides a useful strategy for designing a variety of non-metallic co-doped transition metal oxides to construct trace heavy metal ion-sensitive interfaces.