雕刻
微流控
聚二甲基硅氧烷
材料科学
制作
PDMS印章
纳米技术
流体学
激光器
复合材料
光学
航空航天工程
替代医学
病理
工程类
物理
医学
作者
Eun Seo Kim,Mincheol Cho,Inseong Choi,Sung‐Wook Choi
出处
期刊:Micromachines
[Multidisciplinary Digital Publishing Institute]
日期:2024-04-29
卷期号:15 (5): 599-599
被引量:5
摘要
A perfluoropolyether (PFPE)-based microfluidic device with cross-junction microchannels was fabricated with the purpose of producing uniform droplets. The microchannels were developed using CO2 laser engraving. PFPE was chosen as the main material because of its excellent solvent resistance. Polyethylene glycol diacrylate (PEGDA) was mixed with PFPE to improve the hydrophilic properties of the inner surface of the microchannels. The microchannels of the polydimethylsiloxane microfluidic device had a blackened and rough surface after laser engraving. By contrast, the inner surface of the microchannels of the PFPE-PEGDA microfluidic device exhibited a smooth surface. The lower power and faster speed of the laser engraving resulted in the development of microchannels with smaller dimensions, less than 30 μm in depth. The PFPE and PFPE-PEGDA microfluidic devices were used to produce uniform water and oil droplets, respectively. We believe that such a PFPE-based microfluidic device with CO2-laser-engraved microchannels can be used as a microfluidic platform for applications in various fields, such as biological and chemical analysis, extraction, and synthesis.
科研通智能强力驱动
Strongly Powered by AbleSci AI