晶体管型号
香料
晶体管
计算机科学
放大器
电子工程
拓扑(电路)
算法
电气工程
工程类
CMOS芯片
电压
作者
Qihang Yang,Guodong Qi,Weizhuo Gan,Zhenhua Wu,Huaxiang Yin,Tao Chen,Guangxi Hu,Jing Wan,Shaofeng Yu,Ye Lü
标识
DOI:10.1109/ted.2021.3093376
摘要
Transistor compact model (TCM) is the key bridge between process technology and circuit design. Typically, TCM is desired to capture the nonlinear device electronic characteristics and their high-order derivatives. However, for the novel devices in advanced and future technologies, establishing TCM based on analytical equations and extracting model parameters becomes tedious. The model fitting capability for device outputs’ high-order derivatives is also limited. These drawbacks hinder fast and accurate device to circuit evaluation cycles. We develop a TCM based on multigradient neural network (MNN) using computational graph in the PyTorch framework. This MNN model is able to simultaneously capture the transistor dc/ac characteristics, such as${I}-{V}/{Q}-{V}$, their derivatives (${G}-{V}/{C}-{V}$), and higher order derivatives accurately. Moreover, the model architecture can be widely adapted to various device types. Based on this model scheme, software is developed to enable the automated model generation for standard SPICE simulation. Finally, the model and software are validated for novel gate-all-around (GAA) Si cold source field-effect transistors (CSFET), and 19-stage ring oscillator and two-stage operational amplifier circuit simulations have also been demonstrated. This work reduces the cycle of novel device compact model creation and circuit benchmark simulation from months or weeks to hours. In addition, it enables more precise circuit simulation for analog and RF circuits, and it provides a rapid solution for early stage design technology cooptimization (DTCO).
科研通智能强力驱动
Strongly Powered by AbleSci AI