控制理论(社会学)
脉冲(物理)
惯性参考系
惯性
定子
转动惯量
执行机构
打滑(空气动力学)
偏转(物理)
压电
虚拟力
工程类
声学
机械
计算机科学
物理
机械工程
经典力学
航空航天工程
电气工程
人工智能
控制(管理)
作者
Guangda Qiao,Peng Ning,Xia Xiao,Yang Yu,Xiaohui Lu,Tinghai Cheng
标识
DOI:10.1109/tie.2021.3073314
摘要
A piezoelectric stick–slip actuator with the inertial block structure is presented in an attempt to achieve smooth motion. Under asymmetric excitation, the inertial block produces different inertia, which can dynamically change the normal pressure between the stator and rotor to adjust the friction. During the slip stage, the driving arm produces a deflection away from the rotor, the normal pressure between the stator and rotor can be eliminated, and the angular impulse of the moment of friction force on the rotor can be almost reduced to zero. To verify the feasibility of the prototype, finite-element method simulation is performed. On the basis of the experimental system, the output characteristics of the prototype are systematically studied. The experimental results indicate that the prototype can achieve smooth motion under large pretightening displacement. The displacement curve under the load of 2.0 kg still shows good smoothness, and the resolution is 1.56μrad. This article proposes a new design concept of dynamic control of the normal pressure to achieve smooth motion for piezoelectric stick–slip actuators, even under heavy-load conditions, using the inertial block structure.
科研通智能强力驱动
Strongly Powered by AbleSci AI