固化(化学)
材料科学
倒装芯片
环氧树脂
残余应力
本构方程
制作
可靠性(半导体)
电子包装
复合材料
机械工程
有限元法
结构工程
工程类
医学
胶粘剂
量子力学
图层(电子)
物理
功率(物理)
替代医学
病理
作者
L.J. Ernst,C. van ‘t Hof,Daoguo Yang,Mehdi Saeed Kiasat,G.Q. Zhang,H.J.L. Bressers,J.F.J.M. Caers,A. W. J. den Boer,J.H.J. Janssen
摘要
Thermo-setting polymers are widely used as underfill materials to improve the reliability of electronic packages. In the design phase, the influence of underfill applications on reliability is often judged through thermal and mechanical simulations, under assumed operating conditions. Because of lacking insight into the mechanical processes due to polymer curing, the impact of processing induced residual stress fields is often neglected. To investigate the evolution of stress and strain fields during the curing process it is important to assume a more appropriate starting point for subsequent process modeling. Furthermore, study of possible damage originating from the fabrication process then comes within reach. To facilitate future analysis of stress and strain fields during the curing process a cure dependent constitutive relation is assumed. An approximate investigation method for the process-dependent mechanical properties, based on Dynamic Mechanic Analysis (DMA), is developed. As an illustration the parameter identification is performed for a selected epoxy resin.
科研通智能强力驱动
Strongly Powered by AbleSci AI