Temperature increasing in titanium implants using a high-intensity diode laser for peri-implantitis decontamination

种植周围炎 热电偶 材料科学 辐照 植入 激光器 生物医学工程 二极管 连续波 光电子学 复合材料 光学 外科 医学 冶金 核物理学 物理
作者
Carla Faustino,Patrícia Aparecida Ana,Luciano Bachmann
标识
DOI:10.1117/12.2289871
摘要

Peri-implantitis is a destructive inflammatory process that affects the tissues that provide support to the dental implant, the bone and gingiva, and can lead to the loss of the implant. Among the treatments of this disease, the irradiation of the contaminated surface with high intensity lasers is considered a promising alternative; Thus, irradiation parameters must be correctly adjusted in order to promote an efficient and safe treatment. This study investigated the temperature changes at the implant-bone interface during simulated implant surface decontamination using an 808nm diode laser. Dental implants were inserted in bovine bone, in which an artificial periimplant bone defect was made. Access holes of 0.5mm diameter were drilled to allow the positioning of four Ktype thermocouples in different regions: T0 Implant-bone interface, T1 inside the implant, T2 In the bone defect, T3 In the apex of the implant. For laser irradiation, an optical fiber was used at a distance of 0.5mm from the implant surface, and the mean output power varied between 0.5 to 3.0W on both pulsed (PW) and continuous (CW) wave modes. Irradiations were performed by 60s, and the temperature rises were registered for a period of 180s. It was observed that the critical threshold of 47ºC was exceeded at T0, T1 e T2 thermocouples when irradiations were performed at 1.0W; for T3 thermocouple, the threshold was exceeded at 3.0W CW mode. For PW mode, the thermocouples T0, T1, T2 had the threshold exceeded at the power of 1,0W and for T3 the threshold was exceeded at 3.0W. Decontamination of implant surfaces using the diode laser did not excessively heat the implant-bone interface within the mean output power ranging from 0.5 to 1.0W; however, the temperature rise is critical when using the mean power of 0.5W CW and 1.0W PW. Thus, using the PW mode up to the power of 1W seems to be a promising parameter for a safe clinical application.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
1秒前
共享精神应助科研通管家采纳,获得10
1秒前
小蘑菇应助科研通管家采纳,获得10
1秒前
1秒前
Akim应助科研通管家采纳,获得10
1秒前
zz完成签到,获得积分10
1秒前
orixero应助科研通管家采纳,获得10
1秒前
汉堡包应助科研通管家采纳,获得10
1秒前
华仔应助科研通管家采纳,获得10
1秒前
大模型应助科研通管家采纳,获得10
1秒前
领导范儿应助科研通管家采纳,获得10
1秒前
sagitar应助科研通管家采纳,获得40
1秒前
1秒前
传奇3应助科研通管家采纳,获得10
1秒前
1秒前
脑洞疼应助科研通管家采纳,获得10
1秒前
2秒前
无极微光应助科研通管家采纳,获得20
2秒前
2秒前
Orange应助科研通管家采纳,获得10
2秒前
领导范儿应助科研通管家采纳,获得10
2秒前
2秒前
科研通AI2S应助科研通管家采纳,获得10
2秒前
无极微光应助科研通管家采纳,获得20
2秒前
清脆音响关注了科研通微信公众号
2秒前
斯文败类应助科研通管家采纳,获得10
2秒前
2秒前
打打应助科研通管家采纳,获得10
2秒前
慕青应助科研通管家采纳,获得10
2秒前
脑洞疼应助科研通管家采纳,获得10
2秒前
CipherSage应助科研通管家采纳,获得10
2秒前
星辰大海应助科研通管家采纳,获得10
2秒前
2秒前
2秒前
酷波er应助科研通管家采纳,获得10
3秒前
ding应助科研通管家采纳,获得30
3秒前
3秒前
3秒前
3秒前
香蕉觅云应助科研通管家采纳,获得10
3秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
Developing Genetic Editing Tools for Lysobacter 2000
卤化钙钛矿人工突触的研究 2000
Моделирование процессов самоорганизации в кристаллообразующих системах 1000
History of U.S. Space Surveillance and Satellite Cataloging 1000
Signals, Systems, and Signal Processing 610
Fundamentals of Pharmaceutical and Biologics Regulations: A Global Perspective, Second Edition 600
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 工程类 有机化学 化学工程 生物化学 计算机科学 物理 内科学 复合材料 催化作用 物理化学 光电子学 电极 细胞生物学 基因 无机化学
热门帖子
关注 科研通微信公众号,转发送积分 6516855
求助须知:如何正确求助?哪些是违规求助? 8309859
关于积分的说明 17763360
捐赠科研通 5619170
什么是DOI,文献DOI怎么找? 2925625
邀请新用户注册赠送积分活动 1902599
关于科研通互助平台的介绍 1763704