催化作用
选择性
尖晶石
选择性催化还原
氨
化学
金属
吸附
无机化学
锰
热液循环
过渡金属
钴
核化学
材料科学
物理化学
化学工程
冶金
有机化学
工程类
作者
Chen Yang,Xiaolong Tang,Honghong Yi,Fengyu Gao,Shunzheng Zhao,Runcao Zhang,Wenjuan Zhu
标识
DOI:10.1002/slct.202001748
摘要
Abstract In this work, the low dimensional flake Mn 4 Co 1 O x composite oxides were prepared by four different methods (hydrothermal, template, co‐precipitation and one‐step, noted as HS, TM, OP and OS, respectively) and used for the ammonia selective catalytic reduction (NH 3 ‐SCR) at low temperatures. The results showed that the activity of the catalysts decreased in the sequence: Mn 4 Co 1 O x ‐HS > Mn 4 Co 1 O x ‐TM > Mn 4 Co 1 O x ‐OP> Mn 4 Co 1 O x ‐OS. The activity of the best catalyst (Mn 4 Co 1 O x ‐HS) was nearly 100 % NO conversion in the temperature range of 75–250 °C and the N 2 selectivity remained above 50 % even at 250 °C. Mn 4 Co 1 O x ‐TM catalyst also maintained the NO conversion more than 90 % in the range of 100–250 °C, but the N 2 selectivity was poor. The catalytic activity of the other two catalysts was slightly lower than the above two catalysts. Based on the comprehensive characterization, it was found that the Mn 4 Co 1 O x ‐HS catalyst had a higher NH 3 adsorption and activation capacity, which was attributed to the higher surface area caused by its approximately two‐dimensional folded layered structure leading to more active sites. Meanwhile, it was rich in the surface acid sites, Mn 3+ , Co 3+ and surface oxygen in the Mn−Co spinel structure, thus giving strong acidity and good redox capacity.
科研通智能强力驱动
Strongly Powered by AbleSci AI