The increasing penetration of renewable energy sources (RES) and the subsequent displacement of conventional synchronous generators have led to a significant reduction in rotational inertia, diminishing the transient and frequency stability of modern power grids. To mitigate this vulnerability, this study investigates the implementation of virtual synchronous generator (VSG) controls in grid-forming (GFM) inverters to actively emulate synchronous machine behaviour and provide virtual inertia. Specifically, this project evaluates a self-adaptive control framework that dynamically tunes the virtual inertia (J) and damping ratio (D) parameters during load disturbances. The methodology combines MATLAB and PowerFactory to perform eigenvalue analysis and time-domain simulations to verify the system’s small-signal stability and frequency stability, utilizing IEEE 9-bus system. The simulation results demonstrate that increasing D primarily improves the frequency nadir and quasi-steady state (QSS) frequency, whereas increasing J, reduces the rate of change of frequency (ROCOF) to provide a smoother transient response. Furthermore, implementing the adaptive J and D control strategy significantly minimizes frequency deviations and improves recovery times compared to static parameter baselines. This adaptive approach proves particularly critical in weak, low-inertia grid scenarios, successfully preventing the frequency from reaching critical thresholds. Finally, the study concludes that distributing J and D across multiple inverters provides superior inertial support and better small-signal margins than concentrating the same capacity within a single unit.