材料科学
复合材料
摩擦学
微观结构
复合数
沉浸式(数学)
热稳定性
聚四氟乙烯
氧化物
固化(化学)
腐蚀
纳米颗粒
环氧树脂
摩擦系数
粘附
降级(电信)
结块
铝
磨料
纳米复合材料
作者
Zehua Xu,Shipeng Wang,Yongle Zhang,Anling Li,Yanbin Zhang
摘要
ABSTRACT Fluoroelastomer (FKM) is widely used in aerospace sealing but suffers from synergistic degradation caused by thermal oxidative aging, low temperature embrittlement, salt spray corrosion, and oil swelling. In this study, polytetrafluoroethylene (PTFE) and aluminum oxide (Al 2 O 3 ) hybrid nanofillers were incorporated into the FKM matrix and surface, and tailored microstructures were engineered to fabricate a FKM/PTFE/Al 2 O 3 composite. The composite exhibited excellent stability under harsh conditions: after exposure to 200°C and −20°C, and after immersion in 5 wt% NaCl solution and hydraulic oil, its hardness change remained within ±3%, outperforming pristine FKM. Tribological tests showed friction coefficient reductions of 61.3% at high temperature, 68.2% at low temperature, 62.5% after NaCl solution immersion and 80.5% after hydraulic oil immersion compared to aged FKM, along with significantly reduced wear depth. PTFE provides self‐lubrication that minimizes adhesion and friction, while well‐dispersed Al 2 O 3 nanoparticles act as physical barriers to inhibit medium penetration, reinforce the matrix, and suppress crack initiation and propagation. A multiscale mechanism involving structure guidance, material response, and interface self‐repair underpins these improvements, greatly enhancing FKM's anti‐aging and wear resistance in extreme environments and offering a promising route for high performance sealing materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI