Microstructure and mechanical properties of friction stir welded AZ31 magnesium alloy reinforced with ZrB2

Abstract Metal matrix composites (MMC) have advantages over polymer matrix composites such as high stiffness and strength, high-temperature resistance, better abrasion resistance, creep resistance, resistance to degradation by fluids, dimensional stability, and non-flammability. Metal matrix composites are used for various applications in the automotive, aerospace and sporting goods industries. The primary objectives of the current research work encompass the fabrication of Metal Matrix Composites (MMCs) AZ31 with 0.5%, 1.0% and 1.5% zirconium boride (ZrB 2 ) nano-powder by the stir casting process, followed by welding through Friction Stir Welding (FSW). The metallographic analysis was carried out on the weldments of all cases. The macroscopic and microscopic analysis confirmed the defect-free weld joint. Tensile and hardness tests were conducted to study the mechanical properties of the materials. The tensile strength and the percentage of elongation increased with the percentage of ZrB 2 . But, after 1.0% addition of nano particles the strength decreased. The same pattern had been observed in both base and welded samples. The defect-free welding joints were fabricated with an efficiency of 79.1%, 79.7% and 77.7% for the materials with 0.5%, 1.0% and 1.5% nano powder, respectively. EIS and PDP tests were conducted in 3.5% NaCl to study the corrosion behaviour of base and welded materials. The corrosion tests on the base MMC samples showed that the corrosion resistance increased after the addition of ZrB 2 nanoparticles. In addition, the corrosion resistance of all the welded samples improved compared with their respective base materials.