Effect of addition of LiAlSiO4 on microstructure, phase composition, and electrical properties of Li1.3Al0.3Ti1.7(PO4)3–based solid electrolyte

Li1.3Al0.3Ti1.7(PO4)3 (LATP) NASICON-type ceramic, due to its high bulk conductivity, is believed to be one of the most appropriate material for application as solid electrolyte in all-solid-state lithium-ion batteries. However, its highly resistant grain boundaries strongly limit the total ionic conductivity. Therefore, in this work, an attempt has been made to overcome this problem by introducing a Li-ion conducting additive LiAlSiO4 (LASO) to LATP base matrix in order to provide more conduction paths for lithium ions between grains. The properties of Li1.3Al0.3Ti1.7(PO4)3–xLiAlSiO4 (0.02 ≤ x ≤ 0.1) composite system were studied by means of: high-temperature X-ray powder diffractometry (HTXRD), 6Li, 27Al, and 31P magic angle spinning nuclear magnetic resonance spectroscopy (MAS NMR), scanning electron microscopy (SEM), and impedance spectroscopy (IS) methods. The obtained ceramic LATP–LASO materials exhibited high values of bulk conductivity, above 10−3 S/cm, and good total conductivity, exceeding 10−4 S/cm. The factors responsible for the enhancement, but also for the deterioration of total conductivity, i.e. microstructure and grain boundaries, are identified and discussed in this work.