微观结构
冶金
材料科学
马氏体
冷却曲线
热的
光学显微镜
包裹体(矿物)
连续冷却转变
复合材料
组分(热力学)
缓慢冷却
热膨胀
作者
XU Fei,LI Dian-kai,WANG Liu-tao,WANG Hai-chuan,范鼎东,ZHANG Qing-an,SUN Wei
标识
DOI:10.13374/j.issn2095-9389.2016.s1.033
摘要
The effect of electroslag remelting(ESR) on nonmetallic inclusions in an optimal component 42 CrMo steel was studied by BX51 M optical microscopy and Image Pro-Plus software,and the continuous cooling transformation(CCT) curve was measured on a Gleeble3000 thermal simulation machine. These results show that ESR can reduce the number and size of inclusions in steel samples and the inclusions removal ratio reaches 71.90%. The CCT curve of 42 CrMo steel was plotted according to the thermal expansion curve and microstructure. When the cooling rate is lower,the microstructure is ferrite,pearlite and bainite; but when the cooling rate is higher,there are martensite and a small amount of bainite.
科研通智能强力驱动
Strongly Powered by AbleSci AI