材料科学
结冰
复合材料
涂层
冰核
色散(光学)
透射率
刮擦
表面粗糙度
成核
光学
光电子学
地质学
物理
有机化学
化学
海洋学
作者
Xinghua Wu,Yuxin Tang,Vadim V. Silberschmidt,Peter W. Wilson,Zhong Chen
标识
DOI:10.1002/admi.201800773
摘要
Abstract Ice accretion on automobiles, aerospace components, precision instruments, and photovoltaic devices detrimentally affect their performance and increase the maintenance cost. Despite significant efforts devoted to the investigation of anti‐icing coatings in the past decades, mechanically robust and transparent anti‐icing coatings are rarely reported. In this study, titanate nanotubes are used as filler to prepare mechanically robust anti‐icing coatings with a sol‐gel method. Specially, the effect of dispersion status of nanotubes on the transmittance, surface roughness, and water repellency is investigated. The optimized smooth, transparent coating exhibits higher water repellency and better anti‐icing performance in terms of ice‐adhesion strength, icing delay time, and ice‐nucleation temperature than the rough one. Much higher hardness and scratch resistance than that of commercially available icephobic or anti‐icing coatings is obtained on the smooth, transparent sample; the coating also presents good adhesion to the substrate.
科研通智能强力驱动
Strongly Powered by AbleSci AI