The effect of zirconia content and sintering temperature on properties of zirconia toughened glass infiltrated nanometer - ceramic composite matrix (Al_2O3/nZrO_2)
Objective To investigate the influences of zirconia content and sintering temperature on the mechanical properties of our Al2O3/n ZrO2 ceramic matrix. Methods Al2O3/nZrO2 ceramics powder (W) was processed with combination methods of chemical co - precipitation method and ball milling. Four powders with different ZrO2 content (5wt% , 10wt% , 15wt% and 20wt%) respectively were prepared. Aqueous slips were prepared by mixing 90wt% composite powder (W) and 10wt% special liquid,the matrix compacts were made by slip- casting technique and sintered to 1200℃ , 1450℃ and 1600℃ respectively. The flexural strength of matrix were measured. Results ①There is a significant difference of flexural strength between the groups with 1450℃ , 1600℃ sintering temperature group and 1200℃ group;but no difference between 1450℃ and 1600℃ group;②There is a significant difference of flexural strength between different zirconia volume fraction group under the same sintering temperature. Conclusion So the addition of zirconia and increasing of sintering temperature under the reasonable range do reinforce the ceramic matrix significantly.