Experimental Study on Bending Fatigue Performance of ADI Gears Under Different Applied Load Levels

As austempered ductile iron (ADI) is a key gear material for meeting the lightweight and cost-effective demands of new energy vehicles, its bending fatigue performance has a direct impact on vehicle transmission efficiency. In the present work, QTD 800 gears were subjected to bending fatigue testing using a combination of the conventional group method and the staircase method, with considerations given to fatigue life and fatigue limit at different reliability levels. Subsequently, the gears were characterized using optical microscopy and a microhardness tester to examine their metallographic structure and determine their hardness. The results indicate that the bending fatigue limits corresponding to gear reliability levels of 50%, 90%, and 99% are 390.00 MPa, 372.55 MPa, and 358.32 MPa, respectively. It was also observed that higher gear life stability corresponds to a lower sustainable fatigue limit stress. The analyses further reveal that under low loads, the main crack exhibits a relatively straight and smooth propagation trajectory, formed through the slow extension of an existing crack, whereas under high loads, the main crack displays a rough and serrated appearance, arising from the coalescence of microcracks initiated around graphite nodules.