Constructing a CeFeO3/LaFeO3/ZnIn2S4 double Z-scheme heterojunction for photocatalytic atrazine degradation under visible light irradiation

The limited light absorption range and rapid recombination of interfacial charges were deemed to be the main restriction of the photocatalysts for atrazine (ATZ) degradation, and the construction of Z-scheme heterojunction was an effective strategy. Herein, a CeFeO3/LaFeO3/ZnIn2S4 (CFO/LFO/ZIS) double Z-scheme ternary heterojunction photocatalyst was fabricated by the in-situ precipitation and hydrothermal method. The photocatalytic ATZ degradation efficiency of optimized heterojunction reached 52% within 175 min under visible light irradiation, which was 3.1, 3.7 and 1.7 times higher than that of CFO, LFO and ZIS, respectively. The enhanced photocatalytic activity was due to the excellent light capture capacity and improved photogenerated charge separation in CFO/LFO/ZIS double Z-scheme heterojunction photocatalyst. Meanwhile, some environmental factors on the influence of photocatalytic ATZ degradation performance were systematically investigated. Quenching experiments confirmed that ·OH, h+ and 1O2 were the main active species during the photocatalytic ATZ degradation process. The possible photogenerated charge separation route was proposed via the analysis of the IEF effects between CFO, LFO and ZIS. Finaly, the possible ATZ degradation pathway was deduced by LC-MS measurement and toxicity assessment of the intermediates were also evaluated by the Toxicity Estimation Software Tool (TEST). This work not only provided a potential magnetic recyclable ferrate based double Z-scheme heterojunction photocatalyst for enhancing photogenerated charge separation and light absorption, but also evaluated the intermediate toxicity and related environmental factors on the activity of photocatalyst, which was facilitating the practical application for the degradation of ATZ.