电容
方位(导航)
寄生电容
润滑
有限元法
材料科学
计算机模拟
工作(物理)
滚动轴承
机械
机械工程
工程类
结构工程
电极
声学
计算机科学
物理
人工智能
量子力学
振动
作者
Attila Gonda,Stefan Paulus,Simon Graf,Oliver Koch,Stefan Götz,Bernd Sauer
标识
DOI:10.1016/j.triboint.2024.109354
摘要
In modern frequency inverter controlled electric drive trains, parasitic electric currents can occur in rolling bearings and lead to damages of the bearing components. In the prediction of bearing currents, the bearing capacitance plays a major role. It is commonly calculated based on the Hertzian area and the central lubrication gap height of the contact of the rolling contacts using different correction factors. In this work, a combined simulation model is presented to calculate the rolling bearing capacitance. It considers the capacitance of the rolling contact as well as the regions outside the contact domain. The model consists of an electrically extended EHL simulation of the rolling contact and a FEM simulation of the surroundings. The results of the combined simulation method show a good agreement with experimental results without the use of correction factors.
科研通智能强力驱动
Strongly Powered by AbleSci AI