冷却液
材料科学
计算机冷却
核工程
储能
电子设备和系统的热管理
电池(电)
水冷
体积流量
流量(数学)
热的
热能储存
航程(航空)
能源消耗
热能
消散
工作温度
频道(广播)
冷却能力
相变材料
热力学
能量(信号处理)
传热
环境科学
工艺工程
质量流量
大气温度范围
机械
机械工程
锂(药物)
主动冷却
质量流
高效能源利用
作者
Haojing Wang,Chenchen Yong,Xingang Yang,Chen Fang,Xiaoqing Yang,Xinxi Li
摘要
With the rapid development of high‐power and high‐density electrochemical energy storage stations, conventional liquid cooling plates (LCPs) with serpentine channels suffer from long flow paths, large temperature differences, high flow resistance, and excessive energy consumption, which severely restrict the safety, efficiency, and cycle life of lithium iron phosphate batteries. Herein, we propose a nested dual‐inlet‐dual‐outlet serpentine channel LCP (NSLCP). The new structure shortens the single‐path flow length of coolant, improves flow distribution uniformity, and eliminates excessive coolant temperature rise along the flow path. Thus, the heat dissipation efficiency, temperature uniformity, and system energy consumption are greatly enhanced. Results show that the thermal management system achieves significantly better overall performance with a channel width of 8 mm and a coolant mass flow rate of 2 g·s −1 , compared with conventional structures. In the full operating range of 25–45 °C ambient temperatures and 0.5–2 C discharge rates, the maximum temperature and temperature difference of the battery module are controlled below 28 and 2 °C, respectively. The proposed LCP provides an innovative and practical solution for high‐performance thermal management systems in large‐scale energy storage stations.
科研通智能强力驱动
Strongly Powered by AbleSci AI