计算机冷却
压力降
入口
相变材料
热的
机械工程
材料科学
电池(电)
工作温度
水冷
下降(电信)
核工程
工作液
冷却能力
空气冷却
饱和(图论)
热工水力学
电子设备冷却
传热
联轴节(管道)
泄流深度
热管
汽车工程
优化设计
工程类
潜热
机械
相变
航程(航空)
被动冷却
水力直径
工作(物理)
相(物质)
冷负荷
三相
作者
K.S. Mei,H. Ye,G. Zhu,W.J. Yan,Q. Li,Yu Tao
标识
DOI:10.1016/j.enconman.2026.121928
摘要
Efficient thermal management is essential for maintaining lithium-ion batteries within a safe operating temperature range and ensuring reliable operation in electric vehicles. However, passive phase change material cooling may suffer from latent heat saturation during continuous high-rate discharge, while liquid cooling plates with predefined channels are limited by constrained flow-path design and hydraulic resistance. This work hypothesizes that coupling a topology-optimized liquid cooling plate with phase change material can improve the balance among maximum temperature control, temperature uniformity, and pressure drop in cylindrical lithium-ion battery packs. A hybrid active–passive thermal management system was developed for an eight-cell cylindrical 18650 lithium-ion battery pack, and multi-objective topology optimization was used to design liquid cooling channels under different inlet and outlet configurations. Numerical simulations show that the topology-optimized cooling plate with the central inlet and outlet configuration provides the best overall performance, achieving a maximum battery temperature of 308.08 K, a maximum temperature difference of 3.44 K, and a pressure drop of 3.17 Pa under a 4C discharge rate. Orthogonal experimental design combined with the entropy weight method further identifies the optimal operating condition as an inlet velocity of 0.04 m/s, an inlet temperature of 292.15 K, and RT31 as the phase change material. These results demonstrate that the proposed hybrid system can simultaneously improve thermal regulation and reduce hydraulic resistance, providing a practical reference for the design and operating-parameter selection of high-efficiency battery thermal management systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI