钝化
材料科学
多晶硅
硅
光电子学
饱和电流
化学气相沉积
氧化物
兴奋剂
载流子寿命
共发射极
热氧化
纳米晶硅
硼
图层(电子)
氧化硅
单晶硅
太阳能电池
晶体硅
电流密度
等效氧化层厚度
扩散
薄膜
沉积(地质)
微晶
氧化物薄膜晶体管
电子工程
作者
Clarisse Laurens-Berge,Raphaël Cabal,Sébastien Dubois
标识
DOI:10.1051/epjpv/2026020
摘要
Passivating contacts made of polycrystalline silicon (poly-Si) on top of a thin silicon oxide (SiO x ) have emerged as a key enabling technology for high-efficiency silicon solar cells, such as tunnel oxide passivated contact (TOPCon) devices. However, achieving high-quality surface passivation with hole selective poly-Si contacts remains challenging, especially on textured silicon. In this work, boron-doped p + -poly-Si contacts were formed on textured silicon surfaces using low pressure chemical vapor deposition (LPCVD) process, followed by ex-situ doping by BCl 3 diffusion. Particular attention was paid on engineering more thermally robust oxide layers and controlling the impact of the boron diffusion step on the oxide integrity. A combination of chemical (O 3 -based) and thermal oxidations, together with a boron diffusion process employing drive-in temperatures between 850 °C and 900 °C significantly improved the passivation quality and suppressed a central defect pattern seen with thermal oxidation only. Moreover, the impact of the poly-Si thickness on the surface passivation performance was studied. Poly-Si thicknesses ranging from 41 nm to 108 nm on textured samples resulted in comparable single surface emitter saturation current density (J 0E ) values, indicating a limited influence of the layer thickness within this range. As a result, high and uniform passivation quality was achieved on symmetrical p + -poly-Si textured samples, with a minimum J 0E of 20 fA.cm −2 and implied open-circuit voltage (iV OC ) values of up to 705 mV.
科研通智能强力驱动
Strongly Powered by AbleSci AI