We propose a novel nanofabrication technique for Si based on highly localized chemical catalysis with a platinum-coated AFM tip. Nanoscale grooves can be fabricated on a Si surface at room temperature via Pt-assisted catalytic chemical etching in just water without adding any chemicals to be used as an etchant for Si. In the process, we found that dissolved oxygen present in the water must be a key element to drive the chemical reaction of Si with water. Moreover, experimental results suggested that the oscillating cantilever, i.e. the stirring of the water must be required to overcome oxygen mass transfer limitations, thus enhancing the etch rate. According to electrochemical theory, the elementary chemical reactions during the etching of Si can be estimated as follows. In the first step, the dissolved oxygen (O_2) is reduced and forms hydroxide ions (OH^-) with the water on the surface of the Pt-coated AFM probe. In the second step, the oxidation of Si atoms by the OH^- ions occurs, thus forming a water-soluble silicate (SiO_2(OH)_2^<2->).