Multifunctional Hydrogels Based on MXene@NiFe 2 O 4 Conductive‐Magnetic Composites for Electromagnetic Shielding, Thermal Insulation, and Wearable Sensors
作者
Zhi Lei,Maoxia Lu,Bin Yang,Dongju Liu,Daohai Zhang,Chang Li,Wei Gong
ABSTRACT Traditional electromagnetic shielding materials mainly focus on attenuating electromagnetic interference (EMI), but they still fail to meet the growing demands of modern flexible electronic devices and Internet‐related information technologies. Owing to their excellent flexibility, adaptability, and processability, hydrogels provide a promising platform for the development of flexible wearable electronics. In this study, a PAM/CMC/MXene@NiFe 2 O 4 (PC/MX@NF) multifunctional composite hydrogel with synergistic electromagnetic loss capability was fabricated through a hydrothermal method combined with a one‐pot polymerization strategy. First, NiFe 2 O 4 nanoparticles were prepared via a solvothermal method using ethylene glycol as the solvent and then loaded onto MXene nanosheets to obtain MXene@NiFe 2 O 4 magnetic‐conductive composites. Gallic acid (GA) was further introduced to enhance the antioxidant stability of the composites. Subsequently, the composites were incorporated into a Ca 2+ ‐cross‐linked CMC/AM hydrogel precursor, and a multifunctional hydrogel with a dual‐network structure and EMI shielding capability was formed through free‐radical polymerization. In the performance tests, the optimized PC/MX@NF‐2 hydrogel exhibited an electrical conductivity of 0.679 S m −1 . For the 3‐mm‐thick hydrogel in the X‐band, the average electromagnetic interference shielding effectiveness (EMI SE) reached 44.26 dB. The shielding mechanism was attributed to the synergistic contributions of dielectric loss, magnetic loss, and multiple scattering. Meanwhile, NiFe 2 O 4 regulated the proportion of bound water in the hydrogel, enabling excellent thermal insulation performance. In addition, the hydrogel exhibited outstanding adhesion and high strain sensitivity, with a gauge factor of 1.556 in the strain range of 0%–150%, demonstrating excellent strain‐sensing capability. This work provides a new strategy for developing integrated, tough, and multifunctional materials with electromagnetic shielding, thermal insulation, and sensing capabilities.