粉末冶金
材料科学
可加工性
冶金
机械加工
变形(气象学)
体积分数
微观结构
高温合金
粒度
脆性
变形机理
碎屑形成
复合材料
相(物质)
晶界
晶界滑移
剪切(地质)
作者
Ning Hou,Jianwei Ding,Haonan Zhang,Xuezhi Wang,Minghai Wang,Qijia Wang,Jiakai Qi
标识
DOI:10.1080/10910344.2026.2731056
摘要
The difficulty in machining powder metallurgy superalloys is closely related to the deformation characteristics of the chips produced during turning. To elucidate the microscopic mechanisms of chip deformation during turning, this study systematically investigates the effects of grain size and microstructure on the turning performance and chip deformation of powder metallurgy superalloys. The results indicate that the volume fraction of the secondary γ’ phase is an important factor influencing the machinability of powder metallurgy superalloys. The greater difficulty in deforming coarse-grained chips compared with fine-grained ones is mainly attributed to the higher volume fraction of the secondary γ’ phase in coarse-grained powder metallurgy superalloys. Grain size significantly influences the uniformity and regularity of chip deformation. The distribution and properties of strengthening phase particles affect the deformation resistance of the grain boundary region within the chip. The observed microstructural characteristics indicate that deformation of the secondary γ’ phase occurs primarily through a dislocation shear mechanism. The high hardness and brittleness of the secondary γ’ phase, together with its strong interfacial bonding with the matrix, restrict deformation within grains. Based on the findings, a multi-stage heat treatment strategy is proposed to enhance the machining efficiency and tool life of powder metallurgy superalloys.
科研通智能强力驱动
Strongly Powered by AbleSci AI