材料科学
马氏体
奥氏体
拉丝
无扩散变换
冶金
亚稳态
转化(遗传学)
复合材料
变形(气象学)
奥氏体不锈钢
复合数
产量(工程)
体积分数
机制(生物学)
猝灭(荧光)
动力学
可塑性
变形机理
相(物质)
拉伤
作者
Yongjie Yu,Wujing Fu,Feng Dai,Rengeng Li,Qingquan Lai
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2026-06-05
卷期号:19 (11): 2412-2412
被引量:1
摘要
Wire drawing is a key processing method for producing ultrahigh-strength stainless steel wires. In metastable austenitic steels, the strain-induced martensitic transformation is known to govern strain hardening. However, the transformation mechanism and kinetics behavior under wire drawing remain unclear due to the distinct deformation conditions compared to those of conventional loading modes. In this work, the microstructural evolution, transformation kinetics and strengthening behavior of the 304 stainless steel during cold wire drawing are systematically analyzed. The results show that the transformation is dominated by the austenite → twin→ α'-martensite pathway, with the ε-martensite effectively suppressed. The martensite fraction follows a sigmoidal evolution with the equivalent drawing strain and could be well described by the Olson-Cohen model. The yield strength is increased from 320 MPa to 2 GPa and exhibits a linear relationship with the martensite fraction, indicating a dominant composite strengthening mechanism. These findings clarify the deformation-mode-dependent transformation mechanism and its role in governing mechanical properties during wire drawing.
科研通智能强力驱动
Strongly Powered by AbleSci AI