材料科学
超临界流体
超临界二氧化碳
甲基丙烯酸甲酯
复合数
复合材料
发泡剂
形态学(生物学)
纳米颗粒
聚甲基丙烯酸甲酯
聚合物
化学工程
共聚物
多孔性
纳米技术
化学
有机化学
生物
遗传学
工程类
作者
Merve Ozkutlu,Göknur Bayram,Çerağ Dilek
摘要
Abstract Highly CO 2 ‐philic nanoparticles, octatrimethylsiloxy polyhedral oligomeric silsesquioxanes (POSS) are used to increase the affinity of poly(methyl methacrylate) (PMMA) to CO 2 in supercritical carbon dioxide (scCO 2 ) foaming, thus to improve its foaming performance and the foam morphology. PMMA and PMMA‐POSS composite foams were produced based on the two‐factorial design, at the upper and lower experimental conditions of pressure, temperature, processing time, and venting rate. The foams of PMMA‐5% POSS composites exhibited smaller average pore sizes and higher pore densities than neat PMMA and PMMA‐0.5% POSS composites. The smallest average pore diameter (0.3 μm) and the highest pore density (6.33 × 10 12 cm −3 ) were obtained with this composite processed at 35°C, 32 MPa, for 24 h and depressurized with fast‐venting rate (0.4 MPa/s). ScCO 2 processing decreased the density of the polymer by more than 50%.
科研通智能强力驱动
Strongly Powered by AbleSci AI