材料科学
薄膜
钼
原子层沉积
沉积(地质)
电阻率和电导率
图层(电子)
化学气相沉积
成核
表面粗糙度
钨
燃烧化学气相沉积
化学工程
分析化学(期刊)
碳膜
冶金
纳米技术
复合材料
化学
有机化学
古生物学
工程类
沉积物
电气工程
生物
作者
Baek-Ju Lee,Kyu-Beom Lee,Min-ho Cheon,Dong-Won Seo,Jae-Wook Choi
出处
期刊:Coatings
[Multidisciplinary Digital Publishing Institute]
日期:2023-06-09
卷期号:13 (6): 1070-1070
被引量:23
标识
DOI:10.3390/coatings13061070
摘要
In this study, we conducted research on manufacturing molybdenum (Mo) thin films by a thermal atomic layer deposition method using solid MoO2Cl2 as a precursor. Mo thin films are widely used as gate electrodes and electrodes in metal-oxide semiconductor field-effect transistors. Tungsten (W) has primarily been used as a conventional gate electrode, but it suffers from reduced resistivity due to the residual fluorine component generated from the deposition process. Thus, herein, we developed a Mo thin film with low resistivity that can substitute W. The MoO2Cl2 precursor used to deposit the Mo thin film exists in a solid state. For solid precursors, the vapor pressure does not remain constant compared to that of liquid precursors, thereby making it difficult to set process conditions. Furthermore, the use of solid precursors at temperatures 600 °C and above has many limitations. Herein, H2 was used as the reactive gas for the deposition of Mo thin films, and the deposition temperature was increased to 650 °C, which was the maximum processing temperature of the aluminum nitride heater. Additionally, deposition rate, resistivity change, and surface morphology characteristics were compared. While resistivity decreased to 12.9 μΩ∙cm with the increase of deposition temperature from 600 °C to 650 °C, surface roughness (Rq) was increased to 0.560 nm with step coverage of 97%. X-ray diffraction analysis confirmed the crystallization change in the Mo thin film with increasing process temperature, and a certain thickness of the seed layer was required for nucleation on the initial wafer of the Mo thin film. Thus, the molybdenum nitride thin film was deposited after the 4 nm deposition of Mo thin film. This study confirmed that crystallinity of Mo thin films must be increased to reduce their resistivity and that a seed layer for initial nucleation is required.
科研通智能强力驱动
Strongly Powered by AbleSci AI