Effective Nonstoichiometric Strategy Combined Post-annealing Process for Boosting Thermoelectric Properties in n-Type PbTe

The intrinsic low electrical properties have hindered the enhancement of thermoelectric performance for n-type PbTe over a long period of time, primarily due to the generation of intrinsic Pb vacancies and other defects. In this work, PbTe samples with nonstoichiometric excess Pb atoms were successfully prepared by a melting reaction followed by spark plasma sintering. First, the introduction of precisely controlled excess Pb atoms has effectively eliminated the typical p-n transition phenomenon in PbTe systems by suppressing the generation of Pb vacancies. Further, the vacuum annealing process employed in nonstoichiometric samples increases the carrier mobility significantly because of the improved crystallinity and the lowered holes. Thus, the Hall mobility was optimized from 754.3 to 1215.9 cm² V^-1 s^-1, while the power factor was ultimately elevated from 3087.8 to 4565.7 μW m^-1 K^-2 for the Pb_1.03Te sample at 323 K. Benefited from the enhanced electrical transport properties near room temperature, an average zT ∼ 1.03 ranging from 323 to 723 K was achieved, demonstrating an outstanding performance in n-type nondoped PbTe. This work provides guidance for optimizing the thermoelectric performance of n-type PbTe and relevant telluride by reducing vacancies and other defects.