碳纳米管
废物管理
材料科学
食用油
化学工程
碳纤维
燃料油
制浆造纸工业
有机化学
催化作用
化学
纳米技术
复合材料
工程类
生物柴油
复合数
作者
Karoline K. Ferreira,Christian Di Stasi,Alejandro Ayala-Cortés,Lucília S. Ribeiro,J.L. Pinilla,I. Suelves,Manuel Fernando R. Pereira
标识
DOI:10.1016/j.biombioe.2024.107480
摘要
New fuel production alternatives are becoming increasingly necessary to replace fossil energy sources and reduce the environmental implications of carbon emissions . In this context, renewable sources, such as waste cooking oil (WCO), are an excellent choice for producing bio-based fuels. However, to use WCO as fuel, the oxygen content in its triglyceride structures must be removed. To this end, bimetallic Co-Mo and Ni-Mo supported on pristine carbon nanotubes (CNT) and oxidized carbon nanotubes (CNT ox ) were synthesized to investigate the hydroprocessing of WCO in a batch reactor operating at 350 °C, 70 bar of H 2 (evaluated at ambient temperature) for 3 h. The results showed that Ni-Mo/CNT ox exhibited superior catalytic performance, mainly producing n -alkanes in the range of C 14 -C 22 with a carbon conversion of about 67 mol.% and being selective for light alkanes (6.6 mol.% of C 5 -C 7 ), jet fuel (11.4 mol.% of C 8 -C 16 ) and diesel fuel (81.2 mol.% of C 17 -C 22 ). On the other hand, a residence time of 5 h was necessary to achieve the same results with the carbon-supported Co-Mo catalysts. Hydrodeoxygenation was the main deoxygenation route followed using CNT based catalysts.
科研通智能强力驱动
Strongly Powered by AbleSci AI